Wheel Loader ZL50G-6

This product has been discontinued and removed from our shelves.

Features of Wheel Loader:
1. 4 forward and 3 reverse power shift transmission
2. KD switch for easy and efficient operation
3. Load-sensed full hydraulic steering system dual-pump confluent flow working hydraulic and steering system
4. Combined seal cylinder achieves higher seal performance and more reliability

Specifications of Wheel Loader:
Overall Dimension
1 Length(with bucket on ground) 8215(mm)
2 Width(to outside of wheels) 2800(mm)
3 Bucket width 2946(mm)
4 Height(To the top of the cab) 3450(mm)
5 Wheel base 3350(mm)
6 Tread 2200(mm)
7 Min. ground clearance 450(mm)
Main Technical Specification
1 Rated load 5000(Kg)
2 Operating weight 16300KG
3 Rated bucket capacity 3.0(m3)
4 Max. breakout force 160kN
5 Max. traction 150kN
6 Max. gradient ability 30°
7 Max. dump clearance 3050(mm)
8 Dump reach 1107(mm)
9 Dump angle at any position ≥45°
10 Digging depth(with bucket bottom horizontal) 165(mm)
11 Min. turning radius
  (1) Outside of bucket 6675(mm)
(2) Outside of rear wheel 5879(mm)
12 Pivot angle frame 40°
13 Oscillating angle of rear axle ±13°
14 Lifting time of bucket ≤5.8(sec.)
15 Lowering time of bucket ≤3.8(sec.)
16 Dumping time ≤1.2(sec.)
17 Traveling speed(Km/h),4 forward and 3 reverse
  (1) 1st gear(F/R) 6.7/6.7
(2) 2nd gear (F/R) 12.2/12.2
(3) 3rd gear (F/R) 25.6/25.6
(4) 4rd gear(F) 39
Diesel Engine
1 Model  ShangChai SC11CB220G2B1 engine
2 Type Direct injection. Turbocharge. Water cooling
3 Rated output 162 (kW)
4 Inter-bore of cylinder/stroke 121/152(mm)
5 Total exhaust of cylinder 10.5(L)
6 Model of starting motor KB-24V
7 Power of start motor 7.5(KW)
8 Voltage of starting motor 24(V)
9 Rated speed 2200(r/min.)
10 Max. Torque 843±6%(N.m)/1400(r/min)
11 Starting type Electric
12 Min. specific fuel consumption 230(g/Kw.h)
13 Engine specific oil consumption 0.95-1.77(g/Kw.h)
14 Net weight 960(Kg)
Transmission System
Torque Converter
1 Model ZF technology WG200
2 Type 3-elements.single stage
3 Torque ratio 2.55
4 Cooling type Pressure oil circulating
Transmission case
1 Model ZF technology  WG200
2 Type power shift, spur gear constant-mesh
3 Gear shift position 4 Forward and 3 reverse gears
Axle and Tire
1 Type of main reducer spiral bevel gear, single stage
2 Gear ratio of main reducer 4.625
3 Type of final reducer Single stage planetary
4 Gear of ratio of final reducer 4.9286
5 Total ratios 22.795
6 Size of tire 23.5-25-16PR
Working Device Hydraulic System
1 Model of oil pump CBGj 3100-S
2 System pressure 200(kgf/cm2)
3 Model of Multi-way directional valve 7130-B97(HUSCO)
4 Pilot valve 406-1044-1145(HUSCO)
5 (D*L)Dimension of lifting cylinder Ф160*90*715(mm)
6 (D*L)Dimension of tilting cylinder Ф180*90*530(mm)
Steering  System
1 Type Middle articulated frame. Full-hydraulic Steering
2 Model of steering pump CBGj2063/1016-XFS
3 Model of redirector TLF1-E1000B+FKB6020
4 Model of priority valve YXL-F160L-N7-H
5 System pressure 16MPa
6 Dimension of steering cylinder Ф90*45*400(mm)
Brake System
1 Type of traveling brake Caplier disc brake
Air over oil activate 4 wheel brake
2 Air pressure 6-7.5(kgf/cm2)
3 Type of emergency brake Manual control cutting-off air brake
4 Type of parking brake Drum brake
Manual control cutting-off air brake
Oil Capacity
1 Fuel(diesel) 250(L)
2 Engine lubricating oil 42(L)
3 Oil for converter and gear box 42(L)
4 Oil for hydraulic system 180(L)
5 Oil for driving axles(F/R) 18/18(L)
You get high quality construction machinery and construction equipment by what you pay.