This product has been discontinued and removed from our shelves.
1. The CLD320Y bulldozer is equipped with the engine that has
high power reserve coefficient, high output torque, low fuel
consumption and reliable performance.
2. Hydraulic transmission system is available for variable frequency regulation and non-stop gear shifting.
3. The ROPS-FOPS can protect the machine from being damaged.
4. The new designed three-level guard system concentrates the
electronic part and mechanical part, which can warn the operator of the
potential risk.
5. There is a couple of optional devices, including the air
conditioned cab, warming pot, air heater, ether adder, angular shovel,
stationary shovel, soil loosening device and ROPS-FOPS.
6. Derivative products are numerous, like the enhanced bulldozer, carry scraper and pipelayer.
Engine | CLD320Y |
Model | Commins NTA855-C360 |
Type | Turbo boost, in line, four cylinders |
Flying wheel | 239KW |
Rated running speed | 2000r/min |
No. of cylinder-cylinder diameter×stroke | 6-Φ139.7×152.4mm |
Starting method | 24V 8.11kw Started by electric motor |
Storage battery | 24V(12V×2) |
Air filter | Dry type, horizontal type (dust collector) |
Minimum fuel consumption | 207 (g/kw·h) |
Transmission system | |
Hydraulic torque converter | Three elements, single level, single phase |
Gear box | Planetary type, multiple plate clutch, hydraulic bonded, forced type lubrication, three ahead levels and three recessive levels |
Central transmission mechanism | Spiral bevel gear, splash lubrication |
Steering clutch | Wet type, multiple plate, spring compression, hydraulic detaching |
Steering braking device | Wet type, belt braking, hydraulic linkage operation |
Final transmission device | Straight gear, secondary deceleration, splash lubrication |
Running speed | |
1st 2st 3st | |
Move forward | 3.6 6.6 11.5 |
Move backward | 4.4 7.8 13.5 |
Hydraulic pressure system | |
Working pressure | 13.7Mpa |
Rated flow rate | 335L/min |
Oil pump | Gear pump CBZ4200 |
Handle valve | Manual slide valve, servo handle |
Oil cylinder: Cylinder diameter × Rod diameter × Stroke | Φ140×Φ75×1340mm |
Waking device | |
Driving wheel | Block type chain wheel |
No. of load bearing wheel (one side) | 2 |
Tensile force mechanism | Oil expansion |
Working mechanism | |
Bulldozing plate form | Half U shovel / Angular shovel / U type shovel |
W×H(mm) | 4130×1590 / 4850×1140 / 4225×1745 |
Max. lifting height(mm) | 1560 / 1560 / 1560 |
Max. soil digging depth (mm) | 560 / 560 / 560 |
Cutting angle(°) | 55 / 55 / 55 |
Max. leaning distance(mm) | 1000 / 1000 / 1000 |
Blade capacity (m³) | 9.2 / 6.3 / 12.3 |
Soil loosening device | |
Model | |
Max. digging depth | |
Max. lifting height | |
Track | |
Type | Sealing type, single tooth |
Pitch | 228.6 |
Width | 560 |
No. of plates (one side) | 41 |
Ground contact length | 3150 |
Ground cleanrance | 2140 |
Center gap between tracks |