This product has been discontinued and removed from our shelves.
Description of Road Roller:Overall Dimension | ||
1 | Length | 6328mm |
2 | Width(to outside of wheels) | 2460mm |
3 | Height(To the top of the cab) | 3285mm |
4 | Wheel base | 3150mm |
5 | Tread | 1645mm |
6 | Min. ground clearance | 430mm |
Main Technical Specification | ||
1 | Static line force | 474N/cm |
2 | Dynamic line force | 1659 N/cm |
3 | Operating weight | 20000kg |
4 | Nominal Amplitude-high-low | 1.9mm 1.0mm |
5 | Centrifugal-Force-high-low | 350kN 270kN |
6 | Total stress force | 46360(kg) |
7 | Static Weight at Drum | 10000kg |
8 | Static Weight at Tires | 10000kg |
9 | Frequency | 29/35Hz |
10 | Min. turning radius(Outside of rear wheel) | 6800mm |
11 | Drum diameter | 1600mm |
12 | Drum width | 2130mm |
13 | Drum thickness | 40mm |
14 | Traveling speed(Km/h),3 forward and 3 reverse | |
(1) 1stgear forward(reverse) | 2.52 | |
(2) 2ndgear forward(reverse) | 5.9 | |
(3) 3rdgear reverse(reverse) | 12.36 | |
15 | Climbing capacity | 30% |
Diesel engine | ||
1 | Model | Chinese Engine D6114ZG2B |
2 | Type | Direct injection. Turbocharged. Water cooling |
3 | Rated output | 128 kW |
4 | Inter-bore of cylinder/stroke | 114/135 (mm) |
5 | Total exhaust of cylinder | 8.3 (L) |
6 | Model of start motor | QD285KS |
7 | Power of start motor | 7.5(KW) |
8 | Voltage of starting motor | 24(V) |
9 | Rated speed | 2000(r/min) |
10 | Max. Torque | 625(N.M) |
11 | Starting type | Electric |
12 | Min. specific fuel consumption | 226(g/Kw.h) |
13 | Net weight | 700(kg) |
Transmission System | ||
1. Transmission case | ||
1 | Model | BJ10.003.107(Chinese Hangchi) |
2 | Main clutch | License JCL380 |
3 | Type | Synchromesh Mechanical shift |
4 | Gear shift position | 3 Forward and 3 reverse gears |
2. Axle and Tire | ||
1 | Type of main reducer | spiral bevel gear, single stage |
2 | Gear ratio of main reducer | 5.286 |
3 | Type of final reducer | Single stage planetary |
4 | Gear of ratio of final reducer | 4.4 |
5 | Gear ratio | 23.2584 |
6 | Size of tire | 23.1-26-14PR |
Working Device Hydraulic System | ||
1 | Model of oil pump | SAUER 90R055 |
2 | System pressure | 420(kgf/cm2) |
3 | Model of oil motor | SAUER 90M055 |
Steering System | ||
1 | Type | Middle articulated frame. Co-axis flow amp. Steering |
2 | Model of steering pump | CBJ50-E25D |
3 | Model of steering gear | BZZ1-E500C |
4 | System pressure | 14MPa |
5 | Dimension of steering cylinder | Ф90*45*280(mm) |
Brake System | ||
1 | Type of traveling brake | Assisted oil.4 wheel brake |
2 | Air pressure | 6-8(kgf/cm2) |
3 | Type of parking brake | inner expand hoof Automatic boosting. inner expand hoof |
Oil Capacity | ||
1 | Fuel(diesel) | 300 (L) |
2 | Engine lubricating oil | 22 (L) |
3 | Oil for converter and gear box | 3-4 (L) |
4 | Oil for hydraulic system | 140 (L) |
5 | Oil for driving axles(R) | 24 (L) |
6 | Oil for transfer box | 6.8(L) |