This product has been discontinued and removed from our shelves.
Features of Vibratory Roller:Overall Dimension | ||
1 | Length | 6460mm |
2 | Width(to outside of wheels) | 2130mm |
3 | Height(To the top of the cab) | 3335mm |
4 | Wheel base | 3150mm |
5 | Tread | 1610mm |
6 | Min. ground clearance | 435mm |
Main Technical Specification | ||
1 | Static line force | 506N/cm |
2 | Dynamic line force | 1831 N/cm |
3 | Operating weight | 22000kg |
4 | Nominal Amplitude-high-low | 2.1mm 1.1mm |
5 | Centrifugal-Force-high-low | 390kN 270kN |
6 | Total stress force | 59796(kg) |
7 | Static Weight at Drum | 11000kg |
8 | Static Weight at Tires | 11000kg |
9 | Frequency | 28/32Hz |
10 | Min. turning radius(Outside of rear wheel) | 7000mm |
11 | Drum diameter | 1600mm |
12 | Drum width | 2150mm |
13 | Drum thickness | 50mm |
14 | Traveling speed(Km/h),3 forward and 3 reverse | |
(1) 1st gear forward(reverse) | 2.48 | |
(2) 2nd gear forward(reverse) | 5.19 | |
(3) 3rd gear reverse(reverse) | 11.8 | |
15 | Climbing capacity | 30% |
Diesel Engine | ||
1 | Model | Chinese Engine D6114ZG6B |
2 | Type | Direct injection. Turbocharged. Water cooling |
3 | Rated output | 132 kW |
4 | No-bore of cylinder/stroke | 6-114 X135 (mm) |
5 | Total exhaust of cylinder | 8.3 (L) |
6 | Model of start motor | QD285KS |
7 | Power of start motor | 7.5(KW) |
8 | Voltage of starting motor | 24(V) |
9 | Rated speed | 2000(r/min) |
10 | Max. Torque | 700(N.M) |
11 | Starting type | Electric |
12 | Min. specific fuel consumption | 223(g/Kw.h) |
13 | Net weight | 700(kg) |
Transmission System | ||
Transmission case | ||
1 | Model | YD133(Chinese Hangchi) |
2 | Main clutch | DS395 |
3 | Type | single-plate, dry,diaphragm spring clutch |
4 | Gear shift position | 3 Forward and 3 reverse gears |
Axle and Tire | ||
1 | Type of main reducer | spiral bevel gear, single stage |
2 | Gear ratio of main reducer | 5.286 |
3 | Type of final reducer | Single stage planetary |
4 | Gear of ratio of final reducer | 4.4 |
5 | Total Gear ratios | 23.2584 |
6 | Size of tire | 20.5-25-16PR L-3 |
Working Device Hydraulic System | ||
1 | Model of pump | SAUER 90R075 |
2 | System pressure | 420(kgf/cm2) |
3 | Model of motor | SAUER 90M075NCON8NOC7W |
Steering System | ||
1 | Type | Middle articulated frame. Co-axis hydraulic Steering |
2 | Model of steering pump | CBJ50-E25D |
3 | Model of redirector | BZZ1-E630C+FKA-146021 |
4 | System pressure | 14MPa |
5 | Dimension of steering cylinder | Ф110*295(mm) |
Brake System | ||
1 | Type of service brake | Air assisted oil.4 wheel brake |
2 | Air pressure | 6-8(kgf/cm2) |
3 | Type of hand brake | Drum brake Manual control cutting-off air brake |
Oil Capacity | ||
1 | Fuel(diesel) | 300 (L) |
2 | Engine lubricating oil | 22 (L) |
3 | Oil for converter and gear box | 20-30 (L) |
4 | Oil for hydraulic system | 140 (L) |
5 | Oil for driving axles(Rear) | 24 (L) |
6 | Oil for vibrating drum | 2×2.3(L) |