This product has been discontinued and removed from our shelves.
Description of Wheel Loader ZL60H:Overall Dimension | |||
1 | Length(with bucket on ground) | 8280(mm) | |
2 | Width(to outside of wheels) | 2897(mm) | |
3 | Bucket width | 3048(mm) | |
4 | Height(To the top of the cab) | 3565(mm) | |
5 | Wheel base | 3300(mm) | |
6 | Tyre tread | 2300(mm) | |
7 | Min. ground clearance | 460(mm) | |
Main Technical Specification | |||
1 | Rated load | 6000(Kg) | |
2 | Operating weight | 18600kg | |
3 | Rated bucket capacity | 3.5(m3) | |
4 | Max. breakout force | 186KN | |
5 | Max. Drawing force | 165 KN | |
6 | Max. dump clearance | 3028(mm) | |
7 | Dump reach | 1229(mm) | |
8 | Dump angle at any position | ≥45° | |
9 | Digging depth(with bucket bottom horizontal) | 212(mm) | |
10 | Min. turning radius | ||
(1)Outside of bucket | 6870(mm) | ||
(2)Outside of rear wheel | 6258(mm) | ||
11 | Pivot angle frame | 38±1° | |
12 | Oscillating angle of rear axle | ±12° | |
13 | Lifting time of bucket | 5.8(sec.) | |
14 | Lowering time of bucket | 3.2(sec.) | |
15 | Dumping time | 1.5(sec.) | |
16 | Traveling speed(Km/h) | ||
(1)1st gear (Forward & reverse) | 6.8 | ||
(2)2nd gear (Forward & reverse) | 12.2 | ||
(3)3rd gear (Forward & reverse) | 24.5 | ||
(4)4th gear (Forward) | 35 | ||
Diesel engine | |||
1 | Model | Cummins 6CTAA8.3-C240 (TIER2) | C6121ZG20(TIER1) |
2 | Type | Direct injection. Turbocharged. Water cooling | |
3 | Rated output | 179kW | 174kW |
4 | Inter-bore of cylinder/stroke | 114/135(mm) | 121/152(mm) |
5 | Total exhaust of cylinder | 8.3(L) | 10.5L |
6 | Model of starting motor | Delco-Remy 42MT | 4N3181 |
7 | Power of start motor | 7.5(KW) | 7.5(KW) |
8 | Voltage of starting motor | 24(V) | 24V |
9 | Rated speed | 2200rpm | 2200rpm |
10 | Max. Torque | 1017(N.m)/1500RPM | 912(N.m)/1400RPM |
11 | Starting type | Electric | Electric |
12 | Min. specific fuel consumption | 205(g/Kw.h) | 238g/Kw.h |
13 | Engine specific oil consumption | 1.07(g/Kw.h) | 0.95-1.77(g/Kw.h) |
14 | Net weight | 617(Kg) | 960Kg |
Transmission System | |||
1. Torque Converter | |||
1 | Type | 3-element.single stage | |
2 | Torque ratio | 2.55 | |
3 | Max. Dia. of flow path | 340(mm) | |
4 | Cooling type | Pressure oil circulating | |
2. Gear Box | |||
1 | Model | ZF 4WG200 | |
2 | Type | Fixed shaft. Power shift | |
3 | Gear shift position | 4 Forward and 3 reverse gears | |
3. Axle and Tire | |||
1 | Type of main reducer | single stage | |
2 | Gear ratio of main reducer | 5.111 | |
3 | Type of final reducer | single stage planetary | |
4 | Gear of ratio of final reducer | 5.167 | |
5 | Total gear ratio | 26.409 | |
6 | Size of tyre | 23.5-25 -16PR (L-3) | |
Working Device Hydraulic System | |||
1 | Model of oil pump | P257-G80367ZCA6/P124-G20LIG | |
2 | System pressure | 20(MPa) | |
3 | Model of distribution valve | 7130-B97(HUSCO) | |
4 | Model of pilot valve | 406-1044-1145 (HUSCO) | |
5 | (d*l)Dimension of lifting cylinder | Ф160*90*801(mm) | |
6 | (D*l)Dimension of tilting cylinder | Ф210*110*494(mm) | |
Steering System | |||
1 | Type | Middle articulated frame. full hydraulic power | |
2 | Model of steering pump | P360-G80467RD6G (for C6121) | P257-G80467HCX6/G40LIG (For Cummins) |
3 | Model of steering gear | BZZ3-100 | |
4 | System pressure | 16MPa | |
5 | Dimension of steering cylinder | Ф100*50*425(mm) | |
Brake System | |||
1 | Type of traveling brake | Air assisted oil.4 wheel brake | |
2 | Air pressure | 0.7-0.8 (MPa) | |
3 | Type of emergency brake | Manual control cutting-off air brake | |
4 | Type of parking brake | inner expand hoof Automatic boosting. inner expand hoof |
|
Oil Capacity | |||
1 | Fuel(diesel) | 350(L) | |
2 | Engine lubricating oil | 19(L) | |
3 | Brake System | 2 x 1.5(L) | |
4 | Oil for converter and gear box | 45(L) | |
5 | Oil for hydraulic system | 250(L) | |
6 | Oil for driving axles(F/R) | 70(L)+57(L) |